null
Created with Sketch. Created with Sketch.

AIRnet Piping

  • AIRnet Spanner Torque Head

    AIRnet Spanner Torque Head

    Spanner Torque Head 63 mm, head only, 7/16" square drive, fits Torque Wrench 2811002880 with 1/2" drive head removed for assembling Black Series 63 mm (2 1/2") fittings to full specification. Spec to tighten is 50 N-m.Spanner Torque Head 63 mm, head...

    Starting from $50.29
    Choose Options
  • AIRnet M-NPT Threaded Adapter

    AIRnet PF Series Fiberglass reinforced Polymer Fitting 20 mm PF Series with 1/2" Male NPT Threaded Adapter ends suited for machine or equipment connections at the air source or termination.AIRnet PF Series Fiberglass reinforced Polymer Fitting 20 mm PF...

    Starting from $28.89
    Choose Options
  • Quick Disconnect/Safety Decoupler

    Safety Coupler, Quick Connect w/ rotating safety catch collar, 1/4" NPT threaded - 1/4" Industrial Interchange (standard) inlet body connection for quick connect tool or hose ends (small diameters, low flow).Safety Coupler, Quick Connect w/ rotating...

    Starting from $4.33
    Choose Options
  • AIRnet Fittings, Reducing Tee

    AIRnet Aluminum Reducing Tees, Large Aluminum Fitting 100 mm (4" OD) reducing to Female 1" NPT Threaded connection on the reduced end to connect to standard M-NPT threaded fittings. Large Diamter ends require an Equal Union to connect to Pipe or other...

    Starting from $70.44
    Choose Options
  • AIRnet Spiral Hose

    AIRnet Spiral Hose

    Standard AIRnet Spiral Coil Hose, 5/16" ID, 0 - 16 bar rating, Universal Quick Coupler ends (installed), 12' full length.Standard AIRnet Spiral Coil Hose - long, 5/16" ID, 0 - 16 bar rating, Universal Quick Coupler ends (installed), 20' full length.

    Starting from $38.94
    Choose Options
  • AIRnet Fitting, Quick Drop, Pipe to Pipe

    AIRnet Fiberglass reinforced PF Series Quick Drop Fitting 25 mm to 20 mm, used for creating a drop leg to point of use; Large Diameter is header OD Size reducing to either 20 mm (3/4") or 25 mm (1") Drop Pipes to Machine, Valves, or Manifold terminations...

    Starting from $27.87
    Choose Options
  • Flexible Connector Hose

    Flexible Hoses, Female 3/4" End Connections, 2.5' L - short. 300 psi rated. Use for piston or reciprocating compressor connection outlets to mitigate vibration transfer to the AIRnet.Flexible Hoses, Female 3/4" End Connections, 4.9' L. 300 psi rated. Use...

    Starting from $168.14
    Choose Options
  • AIRnet Fitting, Quick Drop, Pipe to F-NPT

    AIRnet Fiberglass reinforced PF Series Quick Drop Fitting 25 mm - 1/2" F, used for creating a Female-NPT Connection for attaching F-M Shutoff Valves, Hose Reel Connections, or other M-NPT Threaded terminations.AIRnet Fiberglass reinforced PF Series Quick...

    Starting from $34.15
    Choose Options
  • 300 PSI Red Shop Hose

    300 PSI Red Shop Hose

    AIRnet Brand, 3/8" ID, 300 psi rated Shop Hoses, rubber, 25 ft. length coil. Use for flexible hose drops from elevated header and Quick Drop outlets.AIRnet Brand, 3/8" ID, 300 psi rated Shop Hoses, rubber, longer 50 ft. length coil. Use for flexible hose...

    Starting from $46.29
    Choose Options
  • AIRnet Aluminum Pipe 19' length

    AIRnet 20 mm Aluminum Pipe, 18.7' length, Extruded Aluminum polyester powder coated in RAL5012 Blue rated for all compressed air and vacuum applications up to 176* F and 232 psi. Easily installed using common piping tools and Water-based Slide Gel...

    Starting from $45.39
    Choose Options
  • AIRnet Manifold PF Series

    AIRnet Manifold PF Series

    AIRnet PF Series Wall-Mounted Manifold, 20 mm (3/4") Inlet to 3-port cast aluminum F-NPT outlets in standard 1/2" threads with moisture-release valve built in. Designed for work center plug-in ports at point of use.AIRnet PF Series Wall-Mounted Manifold,...

    Starting from $35.09
    Choose Options
  • Reducing Tee

    AIRnet cast Aluminum Reducing Tees, Fitting only, 100 mm, large diameters (require Unions) reducing to PF Series 50 mm Union on the perpedicular end. Pipe connections on all ends.AIRnet cast Aluminum Reducing Tees, Fitting only, 100 mm, large diameters...

    Starting from $36.67
    Choose Options
  • AIRnet Brand Spiral Hose

    AIRnet Brand Spiral Hose

    AIRnet Brand Spiral Coil Hose, 10 mm Inlet x 16 mm Outlet, 0 - 16 bar rating, Universal Quick Coupler ends (installed), 5 meter full length.

    Starting from $75.54
    Choose Options
  • AIRnet Brand Spiral Hose D

    AIRnet Brand Spiral Coil Hose, 10 mm Inlet x 16 mm Outlet, 0 - 16 bar rating, Universal Quick Coupler ends (installed), 10 meter full length.

    Starting from $121.83
    Choose Options
  • AIRnet Spanner Torque Head 80mm

    AIRnet Spanner Torque Head 80mm

    Torque Wrench, wrench only, 1/2" Square drive, preset to 50 N-m for tightening Black Series (with 2811612880 or 2811712880) and for use with 8 mm Hex Drive Head (for 100 mm Equal Union) or 10 mm Hex Drive Head (for 158 mm Equal Union)

    Starting from $292.14
    Choose Options
  • Pipe Deburrer

    Pipe Deburrer

    Deburrer / Chamfer tool, RIDGID brand, for up to 25 mm pipes, softer materialsPin deburrer, small pocket size, use for deburring inner ID pipe edges after cutting and for holes drilled with hole saws to remove jagged edges prior to fittings...

    Starting from $22.36
    Choose Options
  • Aluminum Pipe Cutter

    Aluminum Pipe Cutter

    Pipe Cutter - Manual, RIDGID brand, for pipe OD sizes 12 mm to 66 mm. Use for Aluminum, Stainless Steel, or other materials.Pipe Cutter - Manual, RIDGID brand, for pipe OD sizes 50 mm to 100 mm. Use for Aluminum, Stainless Steel, or other materials.Pipe...

    Starting from $163.04
    Choose Options
  • Hex Drive Head

    Hex Drive Head

    8 mm Hex Drive, 1/2" Drive end, fits Torque Wrench, 2811002880 with drive head installed. Use for tightening 100 mm (4") AIRnet Equal Unions10 mm Hex Drive, 1/2" Drive end, fits Torque Wrench, 2811002880 with drive head installed. Use for tightening 158...

    Starting from $18.62
    Choose Options
  • AIRnet Spanner

    AIRnet Spanner Wrench, PF Series 20 mm (3/4"), designed for removal of AIRnet PF Series fittings. Not necessary for initial installation / assemblyAIRnet Spanner Wrench, PF Series 25 mm (1"), designed for removal of AIRnet PF Series fittings. Not...

    Starting from $7.93
    Choose Options
  • L Key - for Quick Drops

    L Key - for Quick Drops

    5 mm Hex L-Key Allen Wrench, for assembling / tightening PF Series (up to 80 mm) AIRnet "Quick Drop" fittings to main header pipes.

    Starting from $1.49
    Choose Options
  • Drill Bit Arbor

    Drill Bit Arbor

    Hole Saw Arbor, fits any standard power drill / driver, male threaded, use with 14 & 24 mm Hole Saws for drilling Quick Drop holes in header pipes.

    Starting from $9.44
    Choose Options
  • Hole Saw

    Hole Saw

    Promega brand hole saw cutting head, small, 14 mm OD, for use with drill arbor (2810004400, not included), for smaller OD header 25 mm (1") ODPromega brand hole saw cutting head, large, 24 mm OD, for use with drill arbor (2810004400, not included), for...

    Starting from $5.28
    Choose Options
  • AIRnet Pipe Maker Kit

    AIRnet Pipe Maker Kit

    Pipe Depth Market gauge ring kit, sizes 20 mm (3/4") to 158 mm (6"), facilitates proper marking of pipe insertion depths for all sizes of AIRnet pipes and fittings assembly.

    Starting from $4.08
    Choose Options
  • Gel Slide Fluid - Assembly Gel

    Gel Slide Fluid - Assembly Gel

    Gymna / Contact professional ultrasound-type gel slide fluid, water-soluable, evaporates after use / assembly of pipe and fittings, leaves no residue, non-toxic, food safe, with easy clean-up. 1 liter bottle.

    Starting from $12.72
    Choose Options